|
|
*
Pad printing * Prototype Molding for Automotive or decorative products
* Low Durometer
* High tear strength |
|
|
*
Pad Printing * Ready to be used
* Extremely
Low Durometer v 10,20,50,70 on the 00 scale |
|
|
*
Complex Molding and Pad Printing * Low Durometer
* Excellent
Leveling * High tear strength |
|
|
*
High durometer molds to be used with Epoxies and Urethanes.
* Excellent
tear strength * Rollers |
Condensation Cure Molding Systems
| RTV-885 |
*
Detailed and Complex Molding
* Good flow,
self Leveling, and very high tear strength
* Choice of
Working time and Mix Ratios |
RTV-720
High Tear Silicone Rubber
Description:
RTV-720 is a high tear strength, high elongation addition cure mold making
RTV silicone rubber. RTV-720 has low shrinkage and reproduces the most
intricate detail. Major application areas include Flexible Molding and
print pads. It is low viscosity, fast cure, outstanding release characteristics,
good chemical resistance, thick and thin section cure, odorless, non-toxic.
No by-products, non-allergic.
Properties:
|
|
Part-A
|
Part-B
|
| Color |
|
White |
Clear |
| Viscosity, CPS |
|
90,000 |
8,000 |
| Specific Gravity |
|
1.08 |
1.08 |
| Mix Ratio (by weight) |
100:10 |
| Mixed Viscosity, CPS |
60,000 |
| Pot Life @ 72° F, hrs. |
1.5 - 2 |
| Shelf Life @ 72° F, months |
12 |
| Hardness, Durometer Shore A |
20±2 |
| Tensile Strength, PSI |
500 |
| Tensile Elongation, % |
1200 |
| Tear Strength, Die B lb/in. |
125 |
| Tear Strength, Die C lb/in. |
136 |
| Service Temperature Range, °C |
-55 to 200 |
| Coefficient of Expansion, ° C |
|
| Dielectric Strength, Volts/Mil |
555 |
| Dielectric Constant 100 HZ |
3.00 |
| Dissipation Factor 60 HZ |
0.002 |
| Volume Resistivity, ohm-cm |
1.6 x 1015 |
| Thermal Conductivity, BTU in/ft 2
hr ° F |
6.0 x 10-4 |
| |
|
Use Instruction:
Pre mix RTV-720 Base thoroughly. Weigh out the required amount and add
the required amount of Catalyst. Mix thoroughly scraping both the bottom
and sides of the mixing container. Evacuate the air and then pour into
the Mold.
Cure Schedule:
24 Hours @ room temperature.
1-2 Hours @ 150°F.
RTV-720-00
High Tear Silicone Rubber
Description:
RTV-720-00 is a high tear stength, high elongation addition cure mold
making RTV silicone rubber. RTV-720-00 has low shrinkage and reproduces
the most intricate detail. Major application areas include Flexible Molding
and print pads. It is low viscosity, fast cure, Outstanding release characteristics,
good chemical resistance, thick and thin section cure, oderless, non-toxic.
No by-products, non-allergic.
Properties:
|
|
Part-A
|
Part-B
|
| Color |
|
White/Clear |
Clear |
| Viscosity, CPS |
|
25,000 |
20,000 |
| Specific Gravity |
|
1.08 |
1.08 |
| Mix Ratio (by weight) |
1:1 |
| Mixed Viscosity, CPS |
25,000 |
| Pot Life @ 72° F, hrs. |
1.5 - 2 |
| Shelf Life @ 72° F, months |
12 |
| Hardness, Durometer Shore A |
10±2 |
| Hardness, Durometer Shore- 00 |
20-80 |
| Tensile Strength, PSI |
500 |
| Tensile Elongation, % |
1200 |
| Tear Strength, Die B lb/in. |
125 |
| Tear Strength, Die C lb/in. |
136 |
| Service Temperature Range, °C |
-55 to 200 |
| Coefficient of Expansion, ° C |
|
| Dielectric Strength, Volts/Mil |
555 |
| Dielectric Constant 100 HZ |
3.00 |
| Dissipation Factor 60 HZ |
0.002 |
| Volume Resistivity, ohm-cm |
1.6 x 1015 |
| Thermal Conductivity, BTU in/ft 2
hr ° F |
6.0 x 10-4 |
Use Instruction:
Pre mix RTV-720-00 Base thoroughly. Weigh out the required amount and add
the required amount of Catalyst. Mix thoroughly scraping both the bottom
and sides of the mixing container. Evacuate the air and then pour into
the Mold. |
| |
|
RTV-740
High Tear Silicone Rubber
Description:
RTV-740 is a high tear strength, high elongation addition cure mold making
RTV silicone rubber. RTV-740 has low shrinkage and reproduces the most
intricate detail. Major application areas include Flexible Molding and
print pads. It is low viscosity, fast cure outstanding release characteristics,
good chemical resistance, thick and thin section cure, odorless, non-toxic.
No by-products, non-allergic.
Properties:
|
|
Part-A
|
Part-B
|
| Color |
|
White |
Clear |
| Viscosity, CPS |
|
90,000 |
200.00 |
| Specific Gravity |
|
1.08 |
1.08 |
| Mix Ratio (by weight) |
100:10 |
| Mixed Viscosity, CPS |
60,000 |
| Pot Life @ 72° F, hrs. |
1.5 - 2 |
| Shelf Life @ 72° F, months |
12 |
| Hardness, Durometer Shore A |
40±2 |
| Tensile Strength, PSI |
500 |
| Tensile Elongation, % |
1200 |
| Tear Strength, Die B lb/in. |
125 |
| Tear Strength, Die C lb/in. |
136 |
| Service Temperature Range, °C |
-55 to 200 |
| Coefficient of Expansion, ° C |
|
| Dielectric Strength, Volts/Mil |
555 |
| Dielectric Constant 100 HZ |
3.00 |
| Dissipation Factor 60 HZ |
0.002 |
| Volume Resistivity, ohm-cm |
1.6 x 1015 |
| Thermal Conductivity, BTU in/ft 2
hr ° F |
6.0 x 10-4 |
| |
|
Use Instruction
Pre mix RTV-740 Base thoroughly. Weigh out the required amount and add
the required amount of Catalyst. Mix thoroughly scraping both the bottom
and sides of the mixing container. Evacuate the air and then pour into
the Mold.
Cure Schedule:
24 Hours @ room temperature
1-2 Hours @ 150°F |
|
RTV-750
High Tear Silicone Rubber
Description:
RTV-750 is a high tear stength, high elongation addition cure mold
making RTV silicone rubber. RTV-750 has low shrinkage and reproduces the
most intricate detail. Major application areas include Flexible Molding
and print pads. It is low viscosity, fast cure, Outstanding release characteristics,
good chemical resistance, thick and thin section cure, oderless, non-toxic.
No by-products, non-allergic. |
Properties:
|
|
Part-A
|
Part-B
|
| Color |
|
White/Clear |
Clear |
| Viscosity, CPS |
|
120,000 |
100,000 |
| Specific Gravity |
|
1.2 |
1.08 |
| Mix Ratio (by weight) |
1:1 |
| Mixed Viscosity, CPS |
80,000 |
| Pot Life @ 72° F, hrs. |
1.5 - 2 |
| Shelf Life @ 72° F, months |
12 |
| Hardness, Durometer Shore A |
50±2 |
| Tensile Strength, PSI |
500 |
| Tensile Elongation, % |
1200 |
| Tear Strength, Die B lb/in. |
125 |
| Tear Strength, Die C lb/in. |
136 |
| Service Temperature Range, °C |
-55 to 200 |
| Coefficient of Expansion, ° C |
|
| Dielectric Strength, Volts/Mil |
555 |
| Dielectric Constant 100 HZ |
3.00 |
| Dissipation Factor 60 HZ |
0.002 |
| Volume Resistivity, ohm-cm |
1.6 x 1015 |
| Thermal Conductivity, BTU in/ft 2
hr ° F |
6.0 x 10-4 |
Use Instruction:
Pre mix RTV-750 Base thoroughly. Weigh out the required amount and add
the required amount of Catalyst. Mix thoroughly scraping both the bottom
and sides of the mixing container. Evacuate the air and then pour into
the Mold. |
| |
|
|
|
|
|
