POLYCAST 571
One Component, Rigid, Heat Cure Epoxy
DESCRIPTION:
Polycast 571 is a clear, one component, rigid heat cure epoxy system which exhibits high heat resistance.
| PROPERTIES - UNCURED: |
|
|
| Color, Visual |
Clear |
|
| Mixed Viscosity, cps. |
700 |
ASTMD2393 |
| Specific Gravity |
1.18 |
|
| Pot Life @ 70° F, hours |
24 |
|
| Pot Life @ 100° F, hours |
1.5-2 |
|
| Pot Life @ 110° F, hours |
1-1.5 |
|
| Pot Life @ 115° F, hours |
3/4 |
|
| Shelf Life @ 72o F, months |
3 |
|
| |
|
|
| PROPERTIES - CURED: |
|
|
| Hardness Durometer (Shore D) |
88 |
ASTMD 2240 |
| Tensile Strength, psi |
8,700 |
ASTMD 638 |
| Tensile Elongation, % |
2.0 |
ASTMD 638 |
| Flexural Strength, psi |
12,000 |
ASTMD 790 |
| Coefficient of Thermal Expansion (cm/cm/°C) |
77 x 10-6 |
|
| Thermal Conductivity, BTU's (BTU-in/(ft2)(hr)(°F) |
1.9 |
|
| Heat Deflection Temperature, °C |
140 |
|
| Useful Temperature Range, °C |
-40-155 |
|
| Dielectric Strength, volts/mil |
410 |
ASTMD 149 |
| Dielectric Constant, 60 Hz |
4.0 |
ASTMD 150 |
| Dissipation Factor, 60 Hz |
0.01 |
ASTMD 150 |
| Volume Resistivity, ohm-cm |
4 x 1014 |
ASTMD 257 |
CURE SCHEDULE:
6-8 hours @ 95°C - lowest shrinkage
3-5 hours @ 105°C
2-3 hours @ 120°C
NOTE: Post cure 2-3 hours at 150°C for optimum high temperature properties.
|
