DESCRIPTION
P.C.610 is a clear, unfilled epoxy with moderate viscosity for general purpose casting and impregnation, exhibiting excellent electrical and physical properties.

PROPERTIES – UNCURED
Part A Part B
Color , visual ………………………Clear-slightly amber
Viscosity, ASTM-D-2393 (c.p.s. @ 25o C).. 8,000
Specific Gravity …………………………... 1.13
Mix Ratio (by volume) -- 2:1
Mixed Viscosity, ASTM-D-2393 (@ 25o C) -- 6000 cps
Pot Life @ 25OC (100 grams) …………… -- 40 minutes
Shelf Life @ 70o F ………………………. 12 months minimum

PROPERTIES – CURED
Hardness, ASTM-D-2240 (Durometer)………….. Shore D 80
Tensile Strength, ASTM-D-638 ………………… 11,000 psi
Tensile Elongation, ASTM-D-638 ……………… 6.5 %
Flexural Strength, ASTM-D-790 ……………….. 19,500 psi
Compressive Strength, ASTM-D-695 …………... 15,600 psi
Coefficient of Thermal Expansion ……………… 50 x 10-6
Heat Distortion Point ……………………………. 105oC
Dielectric Strength, ASTM-D-149 (volts/mil) ….. 435
Dielectric Constant, ASTM-D-150 ……………... 4.0
Dissipation Factor, ASTM-D-150 ………………. 0.033
Volume Resistivity, ASTM-D-257 (ohm-cm) ….. 12 x 1015

MIXING INSTRUCTIONS
1. Measure out required amount of Part A and Part B.
2. Mix curing agent in thoroughly.
3. Evacuate for 2 – 5 minutes if void-free castings are required.
4. Pour into cavity or mold.