| RTV - 710
General Purpose Silicone
|
| Description:
RTV-710 is an addition cure, flame retardant, general purpose RTV silicone rubber. RTV-710 is suited for commercial potting and encapsulation applications. It has good overall properties, can be cured rapidly at elevated temperatures, is odorless, and non-toxic. RTV-710 has a one-to-one mixing ratio, making it ideal for automatic dispensing or unskilled labor. It contains no by-products, and is non-allergenic. RTV-710 conforms to UL94v0 - UL File Number E164275 |
|
Properties: |
|
Part-A |
Part-B |
| Color |
|
Asst. |
Buff |
| Viscosity, CPS |
|
3000 |
3000 |
| Specific Gravity |
|
1.45 |
1.45 |
| Mix Ratio (by weight or volume) |
1:1 |
| Mixed Viscosity, CPS |
2500 |
| Pot Life @ 72° F, min. |
60 |
| Shelf Life @ 72° F, months |
12 |
| Hardness, Durometer Shore A |
60 |
| Tensile Strength, PSI |
650 |
| Tensile Elongation, % |
110 |
| Tear Strength, Die B lb/in. |
30 |
| Linear Shrinkage, % |
0.1 |
| Flammability, UL-94v0 |
Passes |
| Service Temperature Range, °C |
-54 to 204 |
| Coefficient of Expansion, ° C |
22 x 10-5 |
| Dielectric Strength, Volts/Mil |
500 |
| Dielectric Constant 100 HZ |
3.4 |
| Dissipation Factor 60 HZ |
0.005 |
| Volume Resistivity, ohm-cm |
1 x 1015 |
| Thermal Conductivity, BTU in/ft 2 hr ° F |
2.5 |
| Use Instructions: Pre mix RTV-710 thoroughly. Weigh out the required amount of Part A and add the required amount of Part B. Mix thoroughly scraping both the bottom and sides of the mixing container. Evacuate the air and then pour into cavity. |
Cure Schedule:
24 hours @ room temperature
2 hours @ 150°F
Pot Life and cure is dependent on temperature.
Ideal conditions: 68-78°F (20-26°C)
40-60% relative humidity
|
