| RTV - 710 LV
General Purpose Silicone
|
| Description:
RTV-710 LV is a low viscosity, general purpose RTV silicone rubber. RTV-710 LV is suited for commercial potting and encapsulation applications. It has good overall properties, can be cured rapidly at elevated temperatures, is odorless, and non-toxic. RTV-710 LV has a one-to-one mixing ratio, making it ideal for automatic dispensing or unskilled labor. It contains no by-products, and is non-allergenic.
|
|
Properties: |
|
Part-A |
Part-B |
| Color |
|
Black |
Buff |
| Viscosity, CPS |
|
1200 |
1200 |
| Specific Gravity |
|
1.47 |
1.47 |
| Mix Ratio (by weight or volume) |
1:1 |
| Mixed Viscosity, CPS |
1200 |
| Pot Life @ 72° F, hrs. |
2 |
| Shelf Life @ 72° F, months |
6 |
| Hardness, Durometer Shore A |
60 |
| Tensile Strength, PSI |
550 |
| Tensile Elongation, % |
110 |
| Tear Strength, Die B lb/in. |
20 |
| Linear Shrinkage, % |
0.15 |
| Service Temperature Range, °C |
-54 to 260 |
| Coefficient of Expansion, ° C |
22 x 10-5 |
| Dielectric Strength, Volts/Mil |
500 |
| Dielectric Constant 100 HZ |
3.4 |
| Dissipation Factor 60 HZ |
0.005 |
| Volume Resistivity, ohm-cm |
1 x 1015 |
| Thermal Conductivity, BTU in/ft 2 hr ° F |
2.3 |
Use Instructions: Pre mix RTV-710 LV Base thoroughly. Weigh out the required amount and add the required amount of Catalyst. Mix thoroughly scraping both the bottom and sides of the mixing container. Evacuate the air and then pour into cavity. |
Cure Schedule:
24 hours @ room temperature
1-2 hours @ 150°F
|
